RF Feeder Cable 1/2”
Construction
|
Material |
Diameter(mm) |
Inner Conductor Dielectric First Shield Jacket |
Copper Clad Aluminum Foam PE Corrugated Bare Copper Tube PE or LSZH |
4.80 12.3 13.8 15.70 |
Electrical Characteristics
Nominal Capacitance (pF/m) Impedance (Ω) Velocity Ratio DC Resistance inner Conductor(Ω/KM) DC Resistance outer Conductor(Ω/KM) Operating Temperature Min. Bending Radius(Single) |
76 50 88 1.50 1.9 -20℃ to +70℃ 70mm |
Attenuation [@68oF (20oC)]
Frequency(MHz) |
Max Attenuation (dB/100m) |
100MHz 150MHz 200MHz 300MHz 450MHz 800MHz 1000MHz |
2.17 2.70 3.10 3.83 4.75 6.46 7.28 |
1/2" RF Feeder Cable / Corrugated Cable/ Andrew Heliax Cable 1/2" RF feeder cable, 50Ohm, also be named as half inch coaxial cable, has pretty good performances, wish loss, great attenuation and PIM. Its assemblies usually fixed with N type connectors. This 1/2" RF feeder cable and its assemblies are largely used on various antennas, cellphone/mobile phone signal boosters, repeaters. It's also suitable for GSM,CDMA ,PHS ,TD-SCDMA ,CDMA2000 and WCDMA and etc.